Roof Truss Calculator for Fresno, CA
Plan truss quantity and basic roof geometry from building size, pitch, spacing, overhang and truss type.
Roof Truss Calculator
Adjust the measurements and calculate instantly—no contact information required.
Your planning results
Planning estimate only. Product coverage, field measurements, code requirements, structural conditions and contractor scope can change the final quantity or price.
How this calculator works
Truss quantity is the ceiling of building length divided by on-center spacing, plus one closing truss. Roof rise uses half the building width multiplied by the pitch ratio. Top-chord geometry applies the Pythagorean theorem to the half span plus overhang.
Understanding the result
The selected truss type labels the planning case, but it does not change web configuration, member forces or plate design. Optional cost is quantity multiplied by the entered supplier allowance. Gable end frames, piggyback sections, dropped gables, valley sets, bracing packages, delivery and crane service may be separate.
Truss type reference
| Option | Planning use | What to verify |
|---|---|---|
| Common/Fink | Typical clear attic volume | Efficient web layout for many spans |
| Attic | Room/storage zone | Loads and geometry require manufacturer design |
| Scissor | Sloped interior ceiling | Heel, bearing and web design are specialized |
| Mono/Gambrel | Asymmetric or multi-slope form | Project-specific shop drawings required |
Worked Fresno planning example
A 50-foot building at 24 inches on center has 300 spacing intervals across its length in inches divided by 24, or 25 intervals; adding the closing truss produces 26. A 30-foot width at 6:12 creates 7.5 feet of rise before heel height or detailed truss geometry.
Fresno-specific considerations
Actual truss design must account for adopted wind, seismic, dead and live loads, roof covering weight, ceiling loads, equipment, solar, bearing and connection details. Shop drawings, permanent bracing and installation instructions must come from a certified manufacturer and qualified design professionals.
Permit scope and required documents should be confirmed with the City of Fresno Building Permit Center before construction.
For field measurements and project-specific recommendations, continue with our Roof Installation service information.
Frequently asked questions
Why add one truss after dividing length by spacing?
Are gable end trusses the same as common trusses?
Does the tool design a Fink or scissor truss?
What costs are not included?
Who approves truss design?
Related roofing calculators
Reviewed planning information
Prepared for Fresno Roof Repair and reviewed for calculation clarity, accessibility and practical limitations. Geometry and quantity tools do not approve structural design, installation methods or code compliance. Cost and repair tools do not diagnose a roof or create a binding estimate.